成品人视频ww入口,东北老富婆高潮大叫对白,99精品国产在热久久无毒不卡,一区二区三区内射美女毛片

News

Current Position: Home > News
The principle and function of natural gas mold temperature machine
announcer:

The mold temperature machine is used to adjust the equilibrium mold temperature of the mold temperature, which can increase or decrease the temperature. The mold temperature machine uses a heat transfer medium with high thermal conductivity in order to send away the excess heat in the mold in a short time. After setting the thermal equilibrium temperature, the temperature can be automatically controlled within a minimum error, and the fixed value can be maintained. After setting the thermal equilibrium temperature, the temperature can be automatically controlled within a minimum error, and the fixed value can be maintained. The function of the mold temperature machine is to heat the mold and adhere to its working temperature, ensure the quality of the injection molded parts and optimize the processing time?. In the injection molding industry, the temperature of the mold has a decisive effect on the quality of the injection molded parts and the injection time. 1. Thermal balance control of injection molds The heat conduction of injection molding machines and molds is the key to consumer injection parts. Inside the mold, the heat brought by the plastic (such as thermoplastic) is transferred to the material and the steel of the mold through thermal radiation, and then passed to the heat transfer fluid through the propagation. In addition, heat is transferred to the atmosphere and formwork via thermal radiation. The heat absorbed by the heat transfer fluid is taken away by the mold temperature machine. The thermal equilibrium of the mold can be described as: P=Pm-Ps. In the formula, P is the heat taken away by the mold temperature machine; Pm is the heat introduced by the plastic; and the heat distributed by the mold to the atmosphere. 2. The purpose of controlling the mold temperature and the influence of the mold temperature on the injection molded parts In the injection molding process, the main purpose of controlling the mold temperature is to heat the mold to the working temperature, and second to maintain the mold temperature constant at the working temperature. The victory of the above two points can optimize the cycle time, thereby ensuring the stable and high quality of injection molded parts. The mold temperature will affect the appearance quality, mobility, shrinkage, injection cycle and deformation. Excessive mold temperature or lack of it will bring different effects to different data. For thermoplastics, a higher mold temperature will usually improve the appearance quality and mobility, but will extend the cooling time and injection cycle. A lower mold temperature will reduce the shrinkage in the mold, but will increase the shrinkage of the injection molded part after demolding. For thermosetting plastics, a higher mold temperature usually reduces the cycle time, and the time is determined by the time required for the part to cool. In addition, in the processing of plastics, a higher mold temperature will also reduce the plasticizing time and reduce the number of cycles. 3. Preparation conditions for effective control of mold temperature The temperature control system consists of three parts: mold, mold temperature machine, and heat transfer fluid. In order to ensure that heat can be added to the mold or removed, each part of the system must meet the following conditions: First, inside the mold, the external surface of the cooling channel must be large enough, and the diameter of the flow channel must match the ability of the pump (pump pressure). The temperature spread in the cavity has a great influence on the deformation and internal pressure of the part. Reasonable setting of cooling channels can reduce the internal pressure, thereby improving the quality of injection molded parts.

99精品国产一区二区三区| 中国熟妇毛多多裸交视频| 看片在线观看视频免费| 天天爽夜夜爽人人爽一区二区| 国产成人精品日本亚洲| 久久久久久久精品国产亚洲| 成人在色线视频在线观看免费社区| 白嫩少妇喷水正在播放| 无码AV一区在线观看免费| 中文字幕免费无码专区| 国产黄在线观看免费观看网站不卡| 亚洲国产精品自产在线播放| 国产精品日本亚洲欧美| 亚洲国产V高清在线观看| 午夜理论电影在线观看亚洲| 日本无人区1码2码区别| 人人爽天天碰天天躁夜夜躁| 国产乱人伦av在线无码| 99re久久精品国产| 成全视频高清免费观看在线| 丰满人妻熟妇乱又伦精品软件| 日产无人区一线二线三线观看| 久久99国产精品久久99果冻传媒| 精品国产乱码久久久久久久小说| 国产v综合v亚洲欧美久久| 少妇的丰满3中文字幕| 亚洲最大av网站在线观看| 免费观看一区二区三区| 夜夜添无码试看一区二区三区| 中文字幕AV一区二区三区人妻少妇| 五月综合缴情婷婷六月| 日韩一区二区在线观看视频| 无码国产乱人伦偷精品视频| 精品国产香蕉伊思人在线| 中文字幕无码乱人伦免费| 被黑人伦流澡到高潮HNP动漫| 中文字幕人妻无码专区| 日产无人区一线二线三线最新版| 俺去啦最新官网| 一本大道香蕉在线资源| 国产麻花豆剧传媒精品MV|