News
Current Position： Home
> News
What to consider when choosing a natural gas mold temperature controller?
announcer：
As far as the natural gas mold temperature machine is concerned, we can actually call it the mold temperature control machine. For its initial application, it will be directly applied to the temperature control industry of injection molds. Natural gas mold temperature machine will actually be more and more widely used with the development of the machinery industry. As far as the mold temperature machine is concerned, it is generally divided into water temperature machine and its oil temperature machine control. The temperature can reach plus or minus 0.1 degrees.
When choosing a natural gas mold temperature controller, first of all, we actually have to pay attention to a form of control itself. What we will talk about next is that we should pay attention to its cooling capacity and its heating capacity. In addition, we will actually notice the size of its internal throat and the size of its pump and its capacity.
In a modern factory, it is actually because of competition in the market, that is, it can save manpower to a certain extent, and can improve quality. Furthermore, the management strategy to reduce its cost is actually urgent. The use of the mold temperature machine can actually reduce the preheating time of the mold, improve the surface quality of the finished product, and can be fully automated.
As far as the lower end of the natural gas mold temperature controller is concerned, we will actually set up a combustion chamber directly inside it. Then, it will actually be set inside the upper end of the gas mold temperature cabinet. A recovery chamber is actually equipped with a burner that cooperates with the combustion chamber on the lower side of the cabinet.
The burner on the natural gas mold temperature machine is actually connected to the gas pipeline. The air inlet of the natural gas mold temperature machine is actually connected through the intake pipe and the interior of the lower end of the recovery chamber. A spiral heat conduction oil heating pipe is directly arranged inside the combustion chamber of the engine, and the two ends of the spiral heat conduction oil heating pipe are respectively connected to the oil return pipe through the oil inlet pipe.